Quantum sdlt 220 Guía Del Usuario

CHAPTER 4: Installing Your Tape Drive

SDLT 220 and SDLT 320 Product Manual

4-24

March 2004

81-85002-01

AC Power Cord Connector Types

The power supply of the tabletop unit has an auto-sensing feature; no adjustment 
or switch setting changes are required for different AC sources.

Refer to 

 and 

. Connect one end of the AC cord into the power 

connector on the back of the tabletop drive; connect the other end of the cord to the 
AC outlet. Upon completion, proceed to the next section to confirm the 
installation.

To confirm the installation, power on the SDLT system and the host computer. The 
screens displayed at power-up contain BIOS, operating system, and SCSI 
controller information. If the first screen displays host adapter and SCSI ID 
information, then the system is being recognized and the installation is successful. 
Refer to 

 if the installation is not successful.