Roland g-70 Manual De Propietario
Miscellaneous
222
r
G-70 Music Workstation
Note: The G-70 does not support the Edirol DV-7PR’s dual
stream mode.
stream mode.
• Press the [INIT¥SINGLE¥VALUE] field to reset the cur-
rently selected parameter to its default value.
• Press the [INIT¥ALL¥VALUES] field to reset all parame-
ters to their default values.
(4) Press [V-LINK] again to switch off this function (the
button goes dark).
Note: V-LINK messages are transmitted on MIDI channels 13
and 14.
Note: For details on Clips/Palettes, Dissolve Time, and Color
Difference signals (Cb/Cr), refer to the Edirol DV-7PR manual.
and 14.
Note: For details on Clips/Palettes, Dissolve Time, and Color
Difference signals (Cb/Cr), refer to the Edirol DV-7PR manual.
General settings
Here are several functions that apply to the G-70 as
a whole and haven’t been covered elsewhere in this
owner’s manual.
a whole and haven’t been covered elsewhere in this
owner’s manual.
Touch Screen Beep
The G-70’s display generates a beep sound each time
you press a field. That way, you know when you have
selected parameter. You can switch this beep off if you
find it distracting.
you press a field. That way, you know when you have
selected parameter. You can switch this beep off if you
find it distracting.
(1) Press the [MENU] button.
(2) Press the [UTILITY] field, followed by the [GLOBAL]
field.
(3) Press the [TOUCH¥SCREEN¥BEEP] field to switch this
function on or off.
(4) Press the [Back] field to return to the menu or the
[EXIT] button to return to the main page.
Info
There may be times when you perform with a rented
G-70 (and use a memory card that contains all your
settings), in which case it is important to quickly con-
firm whether the G-70 contains the correct wave
expansion board and which system version it uses. You
can also check the remaining capacity of the internal
memory and connected memory card:
G-70 (and use a memory card that contains all your
settings), in which case it is important to quickly con-
firm whether the G-70 contains the correct wave
expansion board and which system version it uses. You
can also check the remaining capacity of the internal
memory and connected memory card:
(1) Press the [MENU] button.
D Beam
Allows you to control several effects (this
depends on the function you assign to the D
Beam controller):
Vinyl RPM‰ Fade to black + playback speed
Cutting‰ Fade to back
Harp, Marimba, Guitar‰ Fade to white
Chimes‰ Lumin
Seashore‰ Sepia
LoFi‰ Color
Sweep‰ Post
Scratch‰ Color Blue
Explosion‰ Color Red
Gunshot‰ Color Violet
Tempo Up & Down + Pitch Up & Down‰
Playback speed
depends on the function you assign to the D
Beam controller):
Vinyl RPM‰ Fade to black + playback speed
Cutting‰ Fade to back
Harp, Marimba, Guitar‰ Fade to white
Chimes‰ Lumin
Seashore‰ Sepia
LoFi‰ Color
Sweep‰ Post
Scratch‰ Color Blue
Explosion‰ Color Red
Gunshot‰ Color Violet
Tempo Up & Down + Pitch Up & Down‰
Playback speed
EXIT