Roland g-70 Manuel Du Propriétaire

r

G-70 Music Workstation

Note: The G-70 does not support the Edirol DV-7PR’s dual 
stream mode.

• Press the [INIT¥SINGLE¥VALUE] field to reset the cur-

rently selected parameter to its default value.

• Press the [INIT¥ALL¥VALUES] field to reset all parame-

ters to their default values.

(4) Press [V-LINK] again to switch off this function (the 

button goes dark).

Note: V-LINK messages are transmitted on MIDI channels 13 
and 14.
Note: For details on Clips/Palettes, Dissolve Time, and Color 
Difference signals (Cb/Cr), refer to the Edirol DV-7PR manual.

The G-70’s display generates a beep sound each time 
you press a field. That way, you know when you have 
selected parameter. You can switch this beep off if you 
find it distracting.

(1) Press the [MENU] button.

(2) Press the [UTILITY] field, followed by the [GLOBAL] 

field.

(3) Press the [TOUCH¥SCREEN¥BEEP] field to switch this 

function on or off.

(4) Press the [Back] field to return to the menu or the 

[EXIT] button to return to the main page.

There may be times when you perform with a rented 
G-70 (and use a memory card that contains all your 
settings), in which case it is important to quickly con-
firm whether the G-70 contains the correct wave 
expansion board and which system version it uses. You 
can also check the remaining capacity of the internal 
memory and connected memory card:

(1) Press the [MENU] button.

D Beam

Allows you to control several effects (this 
depends on the function you assign to the D 
Beam controller):
Vinyl RPM‰ Fade to black + playback speed
Cutting‰ Fade to back
Harp, Marimba, Guitar‰ Fade to white
Chimes‰ Lumin
Seashore‰ Sepia
LoFi‰ Color
Sweep‰ Post
Scratch‰ Color Blue
Explosion‰ Color Red
Gunshot‰ Color Violet
Tempo Up & Down + Pitch Up & Down‰ 
Playback speed