Zhone 6210 Guía Del Usuario

24

6211-I1 ADSL2+ Router User’s Guide

6211-A2-ZB21-40

6. Click on OK  twice to confirm your changes, and close the Control Panel.

1 In the Windows task bar, click on the Start button, point to Settings, and 

then click on Control Panel.

2 Double-click on the Network and Dial-up Connections icon.

3 In the Network and Dial-up Connections window, right-click on the Local 

Area Connection icon, and then select Properties.
The Local Area Connection Properties dialog box display a list of 

currently installed network components. If the list includes Internet 

Protocol (TCP/IP), the protocol has already been enabled; skip to 

4 If Internet Protocol (TCP/IP) does not appear as an installed component, 

click on Install.

5 In the Select Network Component Type dialog box, select Protocol, and 

then click on Add.

6 Select Internet Protocol (TCP/IP) in the Network Protocols list, and then 

click on OK.
You may be prompted to install files from your Windows 2000 

installation CD or other medium. Follow the instructions to install the 

files.

7 If prompted, click on OK to restart your computer with the new settings.

8 After restarting your PC, double-click on the Network and Dial-up 

Connections icon in the Control Panel.

9 In Network and Dial-up Connections window, right-click on the Local 

Area Connection icon, and then select Properties.

10 In the Local Area Connection Properties dialog box, select Internet 

Protocol (TCP/IP), and then click on Properties. 

11 In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio 

button labeled Use the following IP address. Type an address between 

192.168.1.3 and 192.168.1.254 in the IP Address field and 255.255.255.0 

in the Subnet Mask field.

12 Click on OK twice to confirm and save your changes, and then close the 

Control Panel.

1 In the Windows task bar, click on the Start button, point to Settings, and 

then click on Control Panel.

2 Double-click on the Network and Dial-up Connections icon.

3 In the Network and Dial-up Connections window, right-click on the 

Network icon, and then select Properties.