Zhone 6301 Instruccion De Instalación
14
Increasing the Number of End-User Systems
The router can support differing numbers of end-user systems depending on the
functions that are enabled and traffic loading. Typical configurations provide support for
up to 32, 64, or 256 hosts (end-user systems).
functions that are enabled and traffic loading. Typical configurations provide support for
up to 32, 64, or 256 hosts (end-user systems).
The number of end-user systems can be increased by using subnets for static
addressing, or by using Dynamic Host Configuration Protocol (DHCP) for dynamic
addressing.
addressing, or by using Dynamic Host Configuration Protocol (DHCP) for dynamic
addressing.
Increasing the number of PCs may require cable changes. Refer to
. Refer to the
Hotwire DSL Routers User’s Guide for configuration settings
and command line entries.
Cables and Connectors
on page 7 for cable installation
information.
Use a CAT3, or better, cable for the DSL line.
The DSL interface uses a 6-pin, non-keyed
modular plug.
modular plug.
RJ11 6-Pin Connector
Pin #
Function
1 & 2
Not used
3
DSL Ring
4
DSL Tip
5 & 6
Not used
98-15304-01
6-Pin
RJ11 Plug
DSL
Cable
Cable
Pin #1
Pin #6