ZyXEL P-663H-51 Guía Del Usuario
Chapter 8 Security
P-663H-51 User’s Guide
85
To change your ZyXEL Device’s MAC filter settings, click Advanced Setup > Security >
MAC Filtering. The screen appears as shown. You need to know the MAC addresses of the
devices to configure this screen.
MAC Filtering. The screen appears as shown. You need to know the MAC addresses of the
devices to configure this screen.
Figure 44 Advanced Setup > Security > MAC Filtering
The following table describes the labels in this menu.
Table 29 Advanced Setup > Security > MAC Filtering
LABEL
DESCRIPTION
MAC
Filtering
Global
Policy
Filtering
Global
Policy
FORWARDED has the ZyXEL Device forward traffic for all MAC addresses except the
ones in the MAC filtering rules table below.
BLOCKED has the ZyXEL Device block traffic for all MAC addresses except the ones in
the MAC filtering rules table below.
Click Change Policy to reverse this setting.
ones in the MAC filtering rules table below.
BLOCKED has the ZyXEL Device block traffic for all MAC addresses except the ones in
the MAC filtering rules table below.
Click Change Policy to reverse this setting.
VPN/VCI
The port (interface), VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier)
identify the ATM PVC (Permanent Virtual Circuit) to which this rule applies.
identify the ATM PVC (Permanent Virtual Circuit) to which this rule applies.
Protocol
This is the type of packets to which this rule applies. Blank means all types.
Destination
MAC
MAC
The destination MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is
allowed or not allowed to go through the ZyXEL Device. Blank means all destination
MAC addresses.
allowed or not allowed to go through the ZyXEL Device. Blank means all destination
MAC addresses.
Source
MAC
MAC
The source MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is allowed or
not allowed to go through the ZyXEL Device. Blank means all source MAC addresses.
not allowed to go through the ZyXEL Device. Blank means all source MAC addresses.
Frame
Direction
Direction
This is the direction of packet flow to which the rule applies.
Remove
To remove a rule, select its Remove check box and click the Remove button.
Add
Click this button to go to a screen where you can configure settings for a new MAC
filtering rule.
filtering rule.
Remove
To remove a WAN connection, select its Remove check box and click the Remove
button.
button.