ZyXEL P-663H-51 Mode D'Emploi

 Chapter 8 Security

P-663H-51 User’s Guide

To change your ZyXEL Device’s MAC filter settings, click Advanced Setup > Security > 
MAC Filtering. The screen appears as shown. You need to know the MAC addresses of the 
devices to configure this screen.

Figure 44   Advanced Setup > Security > MAC Filtering

The following table describes the labels in this menu.

Table 29   Advanced Setup > Security > MAC Filtering

MAC 
Filtering 
Global 
Policy

FORWARDED has the ZyXEL Device forward traffic for all MAC addresses except the 
ones in the MAC filtering rules table below. 
BLOCKED has the ZyXEL Device block traffic for all MAC addresses except the ones in 
the MAC filtering rules table below. 
Click Change Policy to reverse this setting.

VPN/VCI

The port (interface), VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) 
identify the ATM PVC (Permanent Virtual Circuit) to which this rule applies.

Protocol

This is the type of packets to which this rule applies. Blank means all types.

Destination 
MAC 

The destination MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is 
allowed or not allowed to go through the ZyXEL Device. Blank means all destination 
MAC addresses.

Source 
MAC 

The source MAC addresses (in XX:XX:XX:XX:XX:XX format) of traffic that is allowed or 
not allowed to go through the ZyXEL Device. Blank means all source MAC addresses.

Frame 
Direction

This is the direction of packet flow to which the rule applies.

Remove

To remove a rule, select its Remove check box and click the Remove button. 

Add

Click this button to go to a screen where you can configure settings for a new MAC 
filtering rule.

Remove

To remove a WAN connection, select its Remove check box and click the Remove 
button.