ZyXEL 2WG Guía Del Usuario

Chapter 3 Wizard Setup

ZyWALL 2WG User’s Guide

The ZyWALL offers three choices of encapsulation. They are Ethernet, PPTP or PPPoE. 
The wizard screen varies according to the type of encapsulation that you select in the 
Encapsulation field.

For ISPs (such as Telstra) that send UDP heartbeat packets to verify that the customer is still 
online, please create a WAN-to-WAN/ZyWALL firewall rule for those packets. Contact your 
ISP to find the correct port number.
Choose Ethernet when the WAN port is used as a regular Ethernet.

Figure 17   ISP Parameters: Ethernet Encapsulation

The following table describes the labels in this screen.

Table 12   ISP Parameters: Ethernet Encapsulation

ISP Parameters 

for Internet 

Access

Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular 

Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection.

WAN IP Address 

Assignment 

IP Address 

Assignment 

Select Dynamic If your ISP did not assign you a fixed IP address. This is the 

default selection. 
Select Static If the ISP assigned a fixed IP address.
The fields below are available only when you select Static.