ZyXEL 2WG Guía Del Usuario

Chapter 3 Wizard Setup

ZyWALL 2WG User’s Guide

The following table describes the labels in this screen.

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data 
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
PPTP supports on-demand, multi-protocol, and virtual private networking over public 
networks, such as the Internet.

"

The ZyWALL supports one PPTP server connection at any given time.

Table 13   ISP Parameters: PPPoE Encapsulation

ISP Parameter 

for Internet 

Access

Encapsulation

Choose an encapsulation method from the pull-down list box. PPP over Ethernet 

forms a dial-up connection. 

Service Name 

Type the name of your service provider.

User Name

Type the user name given to you by your ISP. 

Password 

Type the password associated with the user name above.

Retype

 

to 

Confirm

Type your password again for confirmation.

Nailed-Up Select 

Nailed-Up if you do not want the connection to time out.

Idle Timeout

Type the time in seconds that elapses before the router automatically disconnects 

from the PPPoE server. The default time is 100 seconds.

WAN IP Address 

Assignment 

IP Address 

Assignment 

Select Dynamic if your ISP did not assign you a fixed IP address. This is the 

default selection. 
Select Static if the ISP assigned a fixed IP address.
The fields below are available only when you select Static.

My WAN IP 

Address

Enter your WAN IP address in this field. 

First DNS Server
Second DNS 

Server

Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not 

configure a DNS server, you must know the IP address of a machine in order to 

access it.

Back

Click Back to return to the previous wizard screen.

Apply

Click Apply to save your changes and go to the next screen.