ZyXEL p-320w Guía Del Usuario

P-320W User’s Guide

74 

Chapter 4 Wireless LAN

Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the 
same Setup Key as your AP’s and click Save.

Figure 36   Example Wireless Client OTIST Screen

Yes!

To have OTIST automatically generate a WPA-PSK key, select this check box. 

If you manually configured a WEP key or a WPA-PSK key and you also select 

this check box, then the key you manually configured is used.
If you want to configure your own WPA-PSK and have OTIST use that WPA-

PSK, you must:
•

Configure a WPA-PSK in the Wireless General screen.

•

Clear the Yes! checkbox in the OTIST screen and click Apply.

Note: If you already have a WPA-PSK configured in the 

Wireless General screen, and you run OTIST with Yes! 
selected, OTIST will not replace the WPA-PSK. Clear the 
checkbox in the OTIST screen.

If you want OTIST to automatically generate a WPA-PSK, you must:
•

Change your security to No Security in the Wireless General screen.

•

Select the the Yes! checkbox in the OTIST screen and click Apply.

•

The Wireless General screen displays an auto generated WPA-PSK and 

is now in WPA-PSK security mode. 

The WPA-PSK security settings are assigned to the wireless client when you 

start OTIST.

Start

Click Start to encrypt the wireless security data using the setup key and have 

the Prestige set the wireless station to use the same wireless settings as the 

Prestige. You must also activate and start OTIST on the wireless station at the 

same time. 
The process takes three minutes to complete.

Table 26   Wireless: OTIST