Sharp MX-2300N Guía Del Usuario
60
4
Set the margin shift.
(1) Touch the margin shift position.
Select one of the three positions.
(2) Set the amount of the margin shift with
.
0" to 1" (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
5
Press the [COLOR START] key (
)
or the [BLACK & WHITE START] key
(
(
).
Copying will begin.
• If the originals were placed in the document feeder tray, the
originals are copied.
• If you are using the document glass, copy each page one
page at a time. If you are using the sort function or other
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
function that requires all originals to be scanned before the
copies are printed, you must use the same [START] key that
you used to scan the first original to scan each of the
remaining originals.
To cancel scanning of the original and copying...
Press the [STOP] key (
Press the [STOP] key (
).
Rotation copy cannot be used in combination with margin shift.
To cancel the margin shift setting...
Touch the [Cancel] key in the screen of step 4.
Touch the [Cancel] key in the screen of step 4.
System Settings (Administrator): Initial Margin Shift Setting
The default margin shift setting can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".
The default margin shift setting can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".
Special Modes
Margin Shift
OK
OK
Cancel
Right
Left
Down
Side 1
Side 2
(0 1)
inch
inch
(0 1)
inch
inch
1/2
1/2
(1)
(2)
(3)
or