Sharp MX-2300N Guía Del Usuario

Select one of the three positions.

0" to 1" (0 mm to 20 mm) can be entered.

You will return to the base screen of copy mode.

Copying will begin.

• If the originals were placed in the document feeder tray, the 

originals are copied.

• If you are using the document glass, copy each page one 

page at a time. If you are using the sort function or other 
function that requires all originals to be scanned before the 
copies are printed, you must use the same [START] key that 
you used to scan the first original to scan each of the 
remaining originals.

To cancel scanning of the original and copying...
Press the [STOP] key (

).

When the erase function is used, erase takes place at the edges of the original image. If you also use a ratio setting, the 
erase width will change according to the selected ratio. For example, if the erase width setting is 1" (20 mm) and the copy is 
reduced to 50%, the erase width will be 1/2" (10 mm).

To cancel the erase setting...
Touch the [Cancel] key in the screen of step 4.

System Settings (Administrator): Erase Width Adjustment
The default erase width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".

Special Modes

OK

1/4

Margin Shift

Pamphlet Copy

Erase

Tandem

Copy

Dual Page

Copy

Job

Build

Special Modes

Erase

OK

OK

Cancel

Edge

1/2

Center

Erase

Edge

Erase

Edge+Center

Erase

(0  1)
inch