Crown ma-24x6 Guía Del Usuario

Connect the AC power cordset of your amplifier 
to the AC mains power source (power outlet). 

NOTE: The third prong of this connector 
(ground) is an important safety feature. Do not 
attempt to disable this ground connection by 
using an adapter or other methods.

Amplifiers don’t create energy. The AC mains 
voltage and current must be sufficient to deliver 
the power you expect. You must operate your 
amplifier from an AC mains power source with 
not more than 10% variation above or below the 
amplifier’s specified line voltage and within the 
specfied frequency requirements (indicated on 
the amplifier’s back panel label). If you are 
unsure of the output voltage of your AC mains, 
please consult your electrician.

Use the following procedure when first turning 
on your amplifier:

1.

Turn down the level of your audio source. 

2.

Turn down the level controls of the ampli-

fier.

3.

Turn on the “Enable” switch. The Enable 
indicator should glow. 

4.

Turn up the level of your audio source to an 

optimum level.

5.

Turn up the Level controls on the amplifier 

until the desired loudness or power level is 
achieved.

6.

Turn down the level of your audio source to 

its normal range.

For help with determining your system’s 
optimum gain structure (signal levels) 
please refer to the Crown Amplifier Appli-
cation Guide, available online at 
www.crownaudio.com.