Crown ma-24x6 Guía Del Usuario
page 9
Macro-Tech MA-24X6 & 36X12 Power Amplifiers
Operation Manual
2.6 Wire Your System
This section describes the most common way to
install the Macro-Tech 24X6 and 36X12. Each
model is designed for biamplified systems and
includes both a high-power and a medium-
power channel.
install the Macro-Tech 24X6 and 36X12. Each
model is designed for biamplified systems and
includes both a high-power and a medium-
power channel.
Because each channel produces a different
power level, the Macro-Tech 24x6 and 36x12 are
dedicated to two-channel operation. They do
NOT offer mono operation.
power level, the Macro-Tech 24x6 and 36x12 are
dedicated to two-channel operation. They do
NOT offer mono operation.
WARNING: Never strap the outputs
together for Parallel-Mono operation!
Never bridge the outputs for Bridge-Mono
operation!
together for Parallel-Mono operation!
Never bridge the outputs for Bridge-Mono
operation!
Installation of the Macro-Tech 24x6 and 36x12 is
very intuitive. The Channel 1 input feeds the
Channel 1 output and the Channel 2 input feeds
the Channel 2 output. Be sure to connect the
output wiring as shown in Figure 2.6.
very intuitive. The Channel 1 input feeds the
Channel 1 output and the Channel 2 input feeds
the Channel 2 output. Be sure to connect the
output wiring as shown in Figure 2.6.
Five-way binding posts are provided to facilitate
easy connection of loudspeakers to each chan-
nel. Note: Because of its higher output power,
Channel 1 of a Macro-Tech 36x12 has an addi-
tional set of binding posts.
easy connection of loudspeakers to each chan-
nel. Note: Because of its higher output power,
Channel 1 of a Macro-Tech 36x12 has an addi-
tional set of binding posts.
Observe correct loudspeaker polarity and be very
careful not to short the outputs of one channel to
the outputs of the other channel.
careful not to short the outputs of one channel to
the outputs of the other channel.
NOTE: Crown provides a reference of wiring pin
assignments for commonly used connector
types in the Crown Amplifier Application Guide
available at www.crownaudio.com.
assignments for commonly used connector
types in the Crown Amplifier Application Guide
available at www.crownaudio.com.
2 Setup
Figure 2.6 System Wiring (a Macro-Tech 36x12 is shown)