Maytag CWE5800ACS Guía Del Usuario

IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off during the Self-Cleaning cycle. Exposure to the 
fumes may result in death to certain birds. Always move birds to 
another closed and well-ventilated room.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air 
must be able to move freely. Depending on your model, see “Oven 
Vent” section.
Do not clean, rub, damage or move the oven door gasket. 
Oven temperature must be below 400°F (205°C) to program a 
clean cycle.

■

Remove the broiler pan, grid, bakeware, all cooking utensils, 
oven racks and aluminum foil and, on some models, the 
temperature probe from the oven.

■

Use a damp cloth to clean inside door edge and the 
1½" (3.8 cm) area around the inside oven cavity frame, being 
certain not to move or bend the gasket.

IMPORTANT: The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil 
to a powdery ash. 
Once the oven has completely cooled, remove ash with a damp 
cloth. To avoid breaking the glass, do not apply a cool damp cloth 
to the inner door glass before it has completely cooled.
To stop the self-cleaning cycle at anytime, press CANCEL. If the 
temperature is too high the oven door will remain locked and “cool” 
and “locked” will be displayed.
When “LOCK” shows in the display, the door cannot be opened. To 
avoid damage to the door, do not force the door open when 
“LOCK” is displayed.
The oven light will not function during the self-cleaning cycle.

The self-cleaning cycle can be set at HI self-clean time (4 hours 
30 minutes) or LO self-clean time (3 hours 30 minutes). The 
suggested clean times are 3 hours 30 minutes for light soil, or 
4 hours 30 minutes for heavy soil. The last 30 minutes of the cycles 
is for cool down.

1. Close the oven door.
2. Move the door lock lever to the right to the locked position.

3. Press SELF CLEAN to set the clean time to HI (4 hours 

30 minutes). 

4. Press the TEMP/TIME “+” or “-” arrow pads to cycle between 

LO and HI clean time.

5. Press START.

The CLEAN indicator light will be displayed. The time remaining 
will also be displayed.

6. When the self-clean cycle is complete and the oven cools, the 

CLEAN indicator light will turn off. The door can then be 
opened by releasing the door lock.

7. When the oven is completely cooled, remove ash with a damp 

cloth.

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven is cool. Always follow label instructions on cleaning 
products. For additional information, you can visit the Frequently 
Asked Questions (FAQs) section of our website at 
www.maytag.com.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use 
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, 
steel-wool pads, gritty washcloths or abrasive paper towels. 
Damage may occur to stainless steel surfaces, even with one-time 
or limited use.

Rub in direction of grain to avoid damaging.

■

Stainless Steel Cleaner and Polish Part Number 31462 (not 
included): 
See cover for contact information.

■

Liquid detergent or all-purpose cleaner: 
Rinse with clean water and dry with soft, lint-free cloth.

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.
Cleaning Method:

■

Glass cleaner and soft cloth or sponge: 
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682 (not 
included):
See cover for contact information.