OKI B2500 Guía Del Usuario

- 26 -

 

To set the technical parameters:

 

1 Select the desired parameter and confirm with OK.
2 With the keys 

 

or  , modify the parameter 

settings by following the table below and press OK.

Default value of the scan mode 
resolution for the documents to be 
transmitted.

If this parameter is on, your header 
will appear on all documents sent 
to your subscribers with your name, 
number, date and number of 
pages.
Warning: If you send a fax from the 
document loader, the transmission 
header will not appear on the 
document your correspondent 
receives.

Transmission speed for outgoing 
documents.

 

For a quality telephone line 
(compatible, no echo), 
communications occur at 
maximum speed.
However, it may be necessary to 
restrict the transmission speed for 
some calls.

If this parameter is on, the on-line 
echo will be reduced during long 
distance calls.

For some long distance calls 
(satellite), the on-line echo may 
disturb the call.

Choice between transmission 
speed displayed or number of the 
page in progress.

Choosing the printer standby delay: 
the printer will switch to standby 
after a delay (in minutes) of NON-
operation or during the period of 
time of your choice.

If this parameter is on, all 
documents received by your fax will 
include the subscriber’s header 
with his name, number (if available) 
fax print date and the page number.

Transmission speed for incoming 
documents.

 

For a quality telephone line 
(compatible, no echo), 
communications occur at 
maximum speed.
However, it may be necessary to 
restrict the transmission speed for 
some calls.

Number of rings to automatically 
start your machine.

The  Discard Size parameter only 
defines the printing of received 
faxes . The number of lines of a 
document can be too high for the 
printing paper format. This 
parameter defines the threshold 
beyond which the extra lines are 
printed on a second page. Bellow 
this threshold, extras lines are 
deleted. 
If you choose With, the  threshold 
is set on 3 centimeters.
If you choose Without, the 
threshold is set on 1 centimeter.

This parameter helps correct the 
calls made on disturbed  telephone 
lines. It is used when the lines are 
weak or  too noisy. Transmission 
times may be longer.

This parameter lets you choose 
between a complex impedance and 
a 600 Ohm impedance, depending 
on the telephone network your 
terminal is connected to.

This parameter lets you 
automatically register the Internet 
address of your subscribers fax 
during a call (if available).