Aethra d2061 Manual De Usuario
USER’S MANUAL
ADSL TESTER D2061
2.2. Choosing an automatic test
The first step to make an automatic test is to select the access type, the instrument
mode and the type of test:
mode and the type of test:
1
Open the TEST MENU.
The last used setup appears on the screen.
2
Select the ACCESS field and select ISDN.
The lower selection of the screen shows the selected
network configuration (TE-S).
network configuration (TE-S).
3
Select AUTOMATIC TESTS.
4
Perform the test.
2.3. Performing an Access Test
This test allows to verify, automatically, in distinct sequences the following access
parameters:
parameters:
1
Layer 1
2
Layer 2 configuration
3
Layer 3 (bearer and teleservices)
4
Supplementary services
5
B channels
Setting appropriately the parameters above-mentioned, the user can decide the test
sequences to perform. Setting the value “Automatic”, the device will carry out a
complete test sequence, checking all the parameters regarding the interested level.
sequences to perform. Setting the value “Automatic”, the device will carry out a
complete test sequence, checking all the parameters regarding the interested level.
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
25