Viewsonic PJ500 Guía Del Usuario
11
ViewSonic PJ500
NOTE:
Use the remote control at a distance of approximately 10 feet (3m) from the sensor on the
front of the projector, and within a range of 30 degrees left/right. Strong light and obstacles will
interfere with operation of the remote control.
interfere with operation of the remote control.
Setup Menus
The following menus show adjustments and settings you may use when SETUP is selected at the top
of the menu. Part of the SETUP menu differs between RBG input and video input. Select an item
with the
of the menu. Part of the SETUP menu differs between RBG input and video input. Select an item
with the
and
buttons, and start operation. Use the Single menu to reduce menu size. See
Menu Select in Table 3.
AUTO
Automatic Adjustment (for RGB input): Press the AUTO button. Horizontal Position (H.
POSIT), Vertical Position, (V. POSIT), Clock Phase (H. PHASE), and Horizontal Size (H.
SIZE), are automatically adjusted.
• Before using the AUTO feature, be sure to maximize the window of the application
POSIT), Vertical Position, (V. POSIT), Clock Phase (H. PHASE), and Horizontal Size (H.
SIZE), are automatically adjusted.
• Before using the AUTO feature, be sure to maximize the window of the application
displayed on-screen.
Automatic Adjustment (for Video Input): Press the AUTO button. A signal type
appropriate for the input signal is selected automatically. This is valid only when AUTO is set
for VIDEO on the menu.
• This operation requires approximately ten seconds. It may not function correctly with some
appropriate for the input signal is selected automatically. This is valid only when AUTO is set
for VIDEO on the menu.
• This operation requires approximately ten seconds. It may not function correctly with some
input signals.
BLANK ON/OFF
Set/ Clear Blank Mode: press the BLANK button. A blank screen (no image) is displayed in
this mode. Access the Image menu to set the screen color for blank mode.
this mode. Access the Image menu to set the screen color for blank mode.
MENU ON/OFF (*)
Menu Display Start/Stop: Press the MENU button.
• The menu display is terminated automatically after approximately ten seconds of inactivity.
• The menu display is terminated automatically after approximately ten seconds of inactivity.
MENU SELECT
Select Menu Type: After selecting an item from the Setup menu, press the MENU SELECT
button on the remote control. A single menu for the selected item will appear on-screen.
• This is valid only for the Setup menu. Push the MENU SELECT button after selecting an
button on the remote control. A single menu for the selected item will appear on-screen.
• This is valid only for the Setup menu. Push the MENU SELECT button after selecting an
item such as BRIGHTNESS. A separate Brightness menu will appear on-screen.
Figure 10: Setup Menus
Table 4: Setup Menu
Item
Actions/Description
RGB
Video/
S-Video
Component Video
4801/575i/480P
720P/108i
BRIGHT
(Brightness)
(Brightness)
Dark
Light
X
X
X
X
CONTRAST
Weak
Strong
X
X
X
X
Table 3: Basic Operation (Continued)
Item
Description
SETUP
INPUT
OPT.
IMAGE
BRIGHT
CONTRAST
SHAPRNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
ASPECT
SETUP
INPUT
OPT.
IMAGE
100
100
100
800
SETUP
INPUT
OPT.
IMAGE
BRIGHT
CONTRAST
V POSIT
H POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
COLOR BAL B
ASPECT
RGB
VIDEO / S-VIDEO
+1
+1
+1
0
0
0
0
0
0
0
0
COMPONENT
BRIGHT
CONTRAST
COLOR
H PHASE
COLOR BAL R
COLOR BAL B
ASPECT
+1
+1
+1
0
0
0
0
0
0
0
0
0
-2
+1
0
0
0