Viewsonic PJ500 Guía Del Usuario
13
ViewSonic PJ500
Input Menu
The following functions are available when INPUT is selected on
the menu. Select an item with the
the menu. Select an item with the
and
buttons, and start
operation.
Table 5: Input Menu
Item
Description
AUTO
Operation Start/Stop: Press the
button.
Automatic Adjustment at RGB Input: Select the EXECUTE
with the
button. Horizontal position (H.POSIT), vertical position
(V.POSIT), clock AUTO phase (H.PHASE), and horizontal size (H.SIZE) are automatically
adjusted. Use with the window at maximum size in the application
display.
adjusted. Use with the window at maximum size in the application
display.
• This operation requires approximately 10 seconds. This operation may not function
correctly with some input signals; pressing the AUTO button in this case may correct the
problem.
problem.
• This function is the same as for the AUTO function in Basic operation.
RGB
Displays RGB Input Frequency: Displays the horizontal and vertical sync signal
frequencies for RGB input.
• Valid only at RGB input.
frequencies for RGB input.
• Valid only at RGB input.
VIDEO
Operation Start/Stop: Press the
button. Select Video Signal Type: Select the
signal type with the
and
buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL,
or N-PAL as appropriate for the input signal. The selection of AUTO enables and executes
the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.
the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.
• Use this function when the image becomes unstable (eg. the image becomes irregular,
or lacks color) at VIDEO/S-VIDEO input.
• Automatic Adjustment requires approximately ten seconds. It may not function correctly
with some input signals. Pressing the AUTO button in this case may correct this problem
except for the N-PAL input.
except for the N-PAL input.
• For the COMPONENT VIDEO input, this function is not effective and the signal type is
distinguished automatically.
HDTV
Operation Start/Stop: Press the
button.
Select HDTV Mode: Select the 1080i mode or 1035i mode suitable for the input signal with
the
button.
• When the selected HDTV mode is incompatible with the input signal, the image may be
incorrect (eg. the display position or color is incorrect).
SETUP
INPUT
OPT.
IMAGE
AUTO
RGB
VIDEO
HDTV
EXECUTE
CANCEL
CANCEL