Viking Range detu200-4b Guia De Especificaciones
P L A N N I N G A N D D E S I G N G U I D E
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1
R E L E A S E D 0 2 / 0 5 / 1 0
© 2 0 1 0 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
COOKING
Touch Control Electric 30”/36”W. Cooktop
30” min.
(76.2 cm)
13” max.
(
33.0 cm)
8” min.
(20.3 cm)
18” min.
(45.7 c
m)
36” min.
(91.4 cm)
1-1/2” min.
(3.8 cm)*
2-1/2” min.
(6.35 cm)*
Dimensions & Specifications
CLEARANCE DIMENSIONS
• Sides—minimum 8” (20.3 cm)
• Rear—minimum 1-1/2” (3.8 cm)
• From edge of cutout and front edge
• Rear—minimum 1-1/2” (3.8 cm)
• From edge of cutout and front edge
of countertop 2-1/2” (6.35 cm)
• Within 8” (20.3) side clearance; wall
cabinets no deeper than 13” (33.0 cm)
• Countertop depth 25” (63.5 cm)
• Overhead cabinet depth from rear
• Overhead cabinet depth from rear
maximum 13” (33.0 cm)
• Side cabinet height from countertop
minimum 18” (45.7 cm)
• Wall cabinets directly above cooktop
must be minimum 30” (76.2 cm) above
the countertop (unless ventilation
product is used).
the countertop (unless ventilation
product is used).
1. The cooktop CANNOT be installed
directly adjacent to sidewalls, tall
cabinets or appliances, or other side
vertical surfaces above 30” (76.2 cm)
high. A minimum side clearance of 8”
(20.3 cm) is required between the
cooktop and such combustible
surfaces above the countertop.
cabinets or appliances, or other side
vertical surfaces above 30” (76.2 cm)
high. A minimum side clearance of 8”
(20.3 cm) is required between the
cooktop and such combustible
surfaces above the countertop.
2. A minimum height clearance of 18”
(45.7 cm) is required between the
countertop and wall cabinets no
deeper than 13” (33.0 cm) above the
countertop.
countertop and wall cabinets no
deeper than 13” (33.0 cm) above the
countertop.
3. These dimensions are based on a
standard 24” (60.1 cm) deep base
cabinet with a 25” (63.5 cm) deep
countertop and 3/4” backsplash.
cabinet with a 25” (63.5 cm) deep
countertop and 3/4” backsplash.
4. If a ventilation product is installed
over the cooktop, the minimum 30”
(76.2 cm) height clearance above the
unit does not apply. Refer to the
ventilation installation instructions for
further information.
(76.2 cm) height clearance above the
unit does not apply. Refer to the
ventilation installation instructions for
further information.
Warning
The use of cabinets for storage above
the appliance may result in a potential
burn hazard. If a cabinet storage is to be
provided the risk can be reduced by
installing a hood that projects
horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
The use of cabinets for storage above
the appliance may result in a potential
burn hazard. If a cabinet storage is to be
provided the risk can be reduced by
installing a hood that projects
horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.
Important: To ensure proper
performance and extend the life of the
electric components in the cooktop, it is
required that a minimum height
clearance of 1-1/2” (3.8 cm) be located
between the bottom of the induction
cooktop and any shelf or combustible
surface directly below the cooktop. This
includes the top edges of drawers
located directly beneath the cooktop. If a
shelf or drawer is located directly below
the cooktop, a 1” (0.4 cm) gap at the
front of the shelf or drawer is necessary
to allow for proper ventilation.
performance and extend the life of the
electric components in the cooktop, it is
required that a minimum height
clearance of 1-1/2” (3.8 cm) be located
between the bottom of the induction
cooktop and any shelf or combustible
surface directly below the cooktop. This
includes the top edges of drawers
located directly beneath the cooktop. If a
shelf or drawer is located directly below
the cooktop, a 1” (0.4 cm) gap at the
front of the shelf or drawer is necessary
to allow for proper ventilation.
Minimum clearances from adjacent combustible construction