Tivax scout 35 Guía Del Usuario
Tivax Scout 3
5
Portable TV
3. Connect the cable (either from the antenna or from the Cable TV) to the connector
by turning it clockwise. Please refer to figure below. Afterwards, you can start
watching TV or re-do Auto Scan as you did the first time you setup your TV.
watching TV or re-do Auto Scan as you did the first time you setup your TV.
.
4. When you are finished watching
TV, you can unhook the cable from the connector
with your fingers turning counter clockwise, then p
lace the RF connector top back
on the TV by pushing it back into the slot until it is locked tightly. Please refer to the
figures below.
figures below.
TV Input and Output Ports
On the right side of your portable LCD TV, you will see the following I/O ports from
top to bottom, as shown in the figure below:
top to bottom, as shown in the figure below:
9