Tivax scout 35 ユーザーガイド

 
 

                                                                                                   

Tivax Scout 3

5

 Portable TV

 

 

3.  Connect the cable (either from the antenna or from the Cable TV) to the connector 

by turning it clockwise. Please refer to figure below. Afterwards, you can start 
watching TV or re-do Auto Scan as you did the first time you setup your TV. 

.

 

4.  When you are finished watching 

TV, you can unhook the cable from the connector 

with your fingers turning counter clockwise, then p

lace the RF connector top back 

on the TV by pushing it back into the slot until it is locked tightly. Please refer to the 
figures below. 

 

On the right side of your portable LCD TV, you will see the following I/O ports from 
top to bottom, as shown in the figure below: 

  9