Lorex LW2201 Manual De Usuario

 

13 

 
 
 
1. Signal Indicator – The signal indicator 
shows the strength of the signal being 
received from the camera.  
The number of bars in the Signal Indicator 
shows the strength of the signal – One or 
No Bars indicates the signal is poor, and 4 
bars indicate a very strong signal. 

Note: Signal Indicator not shown while 
in Quad Mode. 

 
 
 
 
 
 
 
 
2. Channel Indicator – Displays the current channel 
number. Press the Pair button on the Receiver to 
switch between available cameras. 

Note: Channel Indicator not shown while in Quad 
Mode. 

 
 
 
 
 
 
 
 
 
 
 
3. Status Indicator – The Status indicator message 
“Connecting” appears when the receiver is trying to 
locate a camera. 

Note: There may be temporary signal losses 
for less than 1 second, due to the connection 
retrieval process between the Camera and 
Receiver (when switching between channels). 
This normal and should not be considered a 
defect. 

 
 
 

1

2

3 

Figure 4.1 Quad split-screen view 

Figure 4.0 On-screen display 

Figure 4.2 Connecting message 

: If signal is low (e.g. 1 or 2 

bars) adjust the antennas, or reposition 
the cameras or receiver for best 
performance.