Alpine dha-s680 Guía Del Usuario
28
-EN
Default Settings (SET UP)
ENT
BAND
RTN
V.OUT
DISP
MENU
SET
CHG
Changing the LED indicator setting
Use the following procedure to set whether or not
the product’s LED indicators are on or off.
the product’s LED indicators are on or off.
NOTE
When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even when
the vehicle’s battery is disconnected.
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even when
the vehicle’s battery is disconnected.
1
In the stop mode, press and hold the SET button
for at least 2 seconds.
The setup menu appears.
for at least 2 seconds.
The setup menu appears.
NOTE
This operation cannot be performed in the PRE-STOP
mode. When the disc is being played, press the ■ button
twice to set the stop mode.
mode. When the disc is being played, press the ■ button
twice to set the stop mode.
2
Use the Joystick to select “LED INDICATOR”,
then press the ENT button.
then press the ENT button.
ON
OFF
3
Use the Joystick to select the “ON” or “OFF”,
then press the ENT button.
then press the ENT button.
The LED indicators are lit, indicating the
product’s operating status. “ON” is selected
upon shipment from the factory.
product’s operating status. “ON” is selected
upon shipment from the factory.
The LED indicators are turned off.
When “OFF” is set, the indicators do not light
even when the power is on.
When “OFF” is set, the indicators do not light
even when the power is on.
NOTE
Press the RTN button to return to the previous screen.
4
Press and hold the SET button for at least 2
seconds.
The settings are stored and the set up mode is
canceled.
seconds.
The settings are stored and the set up mode is
canceled.