Alpine IVA-D300 Guía Del Usuario
53
-EN
HDD Player Operation
(Optional)
(Optional)
Listening to Music of HDD
This device is controllable from the unit when Alpine HDD player is
connected.
connected.
1
Touch [SRC] on the main source screen.
The source selection screen appears.
2
Touch [MM DRIVER].
The MM DRIVER mode main screen appears.
3
Select the desired music by touching [g] or
[f].
[f].
Searching: Touch [g] or [f].
Fast-forward/reverse: Touch and hold [g] or [f].
Fast-forward/reverse: Touch and hold [g] or [f].
4
Touch [:/J] to temporarily stop the music
currently playing.
currently playing.
Touch [:/J] again to resume the play.
XM Radio (Optional)
Receiving XM Channels with the XM
Receiver (Optional)
Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment,
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
with up to 100 brand-new digital channels. For a small monthly fee,
subscribers can hear crystal-clear music, sports, news and talk, coast-
to-coast via satellite. For more information, visit XM’s website at
www.xmradio.com or call 1-800-852-9696.
An optional XM Satellite Radio Receiver (TUA-T021XM) and an
optional XM Antenna may be connected to the IVA-D300. With an
XM Receiver connected to the Ai-NET input of the IVA-D300, the
XM Receiver will be controllable from the IVA-D300.
optional XM Antenna may be connected to the IVA-D300. With an
XM Receiver connected to the Ai-NET input of the IVA-D300, the
XM Receiver will be controllable from the IVA-D300.
* XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
• The controls on the IVA-D300 for XM Receiver operation are
operative only when an XM Receiver is connected.
1
Touch [SRC] on the main source screen.
The source selection screen is displayed.
2
Touch [XM].
The XM main screen display appears.
3
Touch [BAND] to select XM1, XM2 or XM3.
4
Touch [NO./NAME] to select the channel number
tuning.
tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
channel number tuning
↔ channel name tuning
5
Touch [; CH NO.] or [CH NO. :] to select the
desired channel. Holding either button down will
change channels continuously.
desired channel. Holding either button down will
change channels continuously.
When selecting the channel name tuning in step 4, select
a channel name by touching [; CH NAME] or [CH NAME
:]. Holding either button down will change channel
names continuously.
a channel name by touching [; CH NAME] or [CH NAME
:]. Holding either button down will change channel
names continuously.