LXE vx7 Guía De Referencia
70
PCMCIA, CF and SD Slots
VX7 Reference Guide
E-EQ-VX7RG-H
Install PCMCIA Cards
Equipment Needed: Phillips No. 1 screwdriver and a Torque wrench capable of measuring to 9±1
inch pounds (1.016±.11 N/m).
inch pounds (1.016±.11 N/m).
Note:
The example below details installing a radio card. Installation of other PCMCIA cards
is similar, except there is no antenna.
is similar, except there is no antenna.
The radio card is installed in slot A (the upper slot). When a second PCMCIA card is present,
such as a Bluetooth CF card via a PCMCIA adapter, the second card is installed in Slot B (the
lower slot).
such as a Bluetooth CF card via a PCMCIA adapter, the second card is installed in Slot B (the
lower slot).
Install the Type II PCMCIA Radio
Caution
!
The LXE Model VX7 Vehicle Mount Computer is specifically for use with LXE
Model 6726, 6816, 4830 and 4831 Type II PCMCIA radios. Substitution of
other PCMCIA radios will void the FCC, Industry Canada and other
international radio certifications for the Model VX7 Vehicle Mount Computer
and is strictly prohibited.
Model 6726, 6816, 4830 and 4831 Type II PCMCIA radios. Substitution of
other PCMCIA radios will void the FCC, Industry Canada and other
international radio certifications for the Model VX7 Vehicle Mount Computer
and is strictly prohibited.
1.
Turn the VX7 off and detach the power cable.
2.
Loosen the three (3) Phillips head screws securing the access panel cover so the cover can
be removed. The screws are a captive part of the cover and cannot be removed.
be removed. The screws are a captive part of the cover and cannot be removed.
Partially insert the Type II PCMCIA Radio into Slot A (the upper right slot).
Caution
!
Slot A MUST BE used for the radio card. Installing a radio card in Slot B can
result in pinching or other damage to the internal antenna cable.
result in pinching or other damage to the internal antenna cable.
SD
CF ATA
PCMCIA A
PCMCIA B
PCMCIA B
Radio Card
Figure 2-40 Inserting the Type II PCMCIA Radio
Note:
The tethered access panel cover is not shown in the illustration above.