Ricoh 1027 Guía De La Red
Remote Maintenance by telnet
59
2
Remote Maintenance by telnet
Important
❒ Remote Maintenance should be
password-protected so that access
is allowed to administrators only.
is allowed to administrators only.
❒ The password is the same as the
one of Web Image Monitor admin-
istrator. When the password is
changed using "mshell", other
passwords change also.
istrator. When the password is
changed using "mshell", other
passwords change also.
❒ Some command cannot be set de-
pending on the model type.
Using telnet
Follow the procedure below to use
telnet.
telnet.
Important
❒ Only one user at a time can log on
to perform remote maintenance.
A
Use the IP address or the host
name of the machine to start telnet.
name of the machine to start telnet.
% telnet IP_address
B
Enter your user name and pass-
word.
For details about the user name
and password, consult your net-
work administrator.
For user authentication, enter a
login user name and password.
For user code authentication, enter
a user code in User Name.
word.
For details about the user name
and password, consult your net-
work administrator.
For user authentication, enter a
login user name and password.
For user code authentication, enter
a user code in User Name.
C
Enter a command.
D
Quit telnet.
msh> logout
The configuration message about
saving the changes appears.
saving the changes appears.
E
Enter "yes" to save the changes,
and then press the {Enter} key.
If you do not want to save the
changes, enter "no", and then press
the {Enter} key. To make further
changes, enter "return" at the com-
mand line, and then press the {En-
ter}
and then press the {Enter} key.
If you do not want to save the
changes, enter "no", and then press
the {Enter} key. To make further
changes, enter "return" at the com-
mand line, and then press the {En-
ter}
key.
Note
❒ If the message "Can not write
NVRAM information" appears,
the changes are not saved. Re-
peat the procedure above.
the changes are not saved. Re-
peat the procedure above.
❒ When the changes are saved,
the network interface board is
reset automatically with that
changes.
reset automatically with that
changes.
❒ When the network interface
board resets, the print job in
print process will be printed.
However, print jobs in queue
will be canceled.
print process will be printed.
However, print jobs in queue
will be canceled.