Ricoh 1027 Guía De La Red

Monitoring and Configuring the Printer

wins

Use the "wins" command to configure
WINS server settings.

❖ Viewing settings

msh> wins

• If the IPv4 address obtained

from DHCP differs from the
WINS IPv4 address, the DHCP
address is the valid address.

❖ Configuration

msh> wins “interface_name”
{on | off}

• {on} means "active" and {off}

means "inactive".

• Be sure to specify the interface.
• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

❖ Address configuration

Use the following command to
configure a WINS server IP ad-
dress:

msh> wins “interface_name”
{primary|secondary} “IP
address”

• Use the “primary” command to

configure a primary WINS serv-
er IP address.

• Use the "secondary" command

to configure a secondary WINS
server IP address.

• Do not use “255.255.255.255” as

the IP address.

❖ NBT (NetBIOS over TCP/IP) Scope ID

Selection

You can specify the NBT scope ID.

msh> wins “interface_name”
scope “scope ID”

• The scope ID can be entered us-

ing up to 31 alphanumeric char-
acters.

• Be sure to specify the interface.
• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

Interface name

Interface config-
ured

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b inter-
face