Ricoh 1027 Guía De La Red
Monitoring and Configuring the Printer
86
2
Getting Printer Information over the Network
This section explains details of each item displayed in the printer status and in-
formation.
This manual covers all models, and therefore contains functions and settings
that may not be available for your model.
formation.
This manual covers all models, and therefore contains functions and settings
that may not be available for your model.
Current Printer Status
The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
• mshell: Use the "status" command.
• UNIX: Use the "lpq" command and "rsh", "rcp", “ftp”, and "sftp" parameters.
• mshell: Use the "status" command.
Messages
Description
1-Sheet Bypass Error: No Select
The one sheet bypass tray is open but printing from
another tray was selected.
another tray was selected.
1-Sheet Bypass Error: Not Open
The one sheet bypass tray is closed but printing from
the one sheet bypass tray was selected.
the one sheet bypass tray was selected.
1-Sheet Output Error: No Select
The one sheet bypass tray is open but printing from
another tray was selected.
another tray was selected.
1-Sheet Output Error: Not Open
The one sheet bypass tray is closed but printing from
the one sheet bypass tray was selected.
the one sheet bypass tray was selected.
Access Restricted
The job was canceled because user have no authority.
Add staples (Booklet: Back)
The staple of booklet finisher (back) is exhausted.
Add staples (Booklet: Both)
The staple of booklet finisher is exhausted.
Add staples (Booklet: Front)
The staple of booklet finisher (front) is exhausted.
Adjusting...
The machine is initializing or calibrating.
Alert at Printer: Yellow LED
An error has occurred.
Call Service Center
There is a malfunction in the machine.
Canceled
The job is reset.
Canceling Job...
The job is being reset.
Card/Counter not inserted
The machine is waiting for prepaid card or key.
Coin or amount not inserted
The machine is waiting for coin to be inserted.
Coin/Key Counter not inserted
The machine is waiting for coin or key counter.
Configuring...
Setting is being changed.
Cooling Down Fusing Unit...
The fusing unit is cooling down.
Copy Tray
Internal tray is full.
Cover Open: ADF
The document feeder is open.
Cover Open: Bridge Unit Left
The cover of the left bridge unit is open.
Cover Open: Bridge Unit Center
The cover of the middle bridge unit is open.