Ricoh spc220s Guía Del Usuario
105
4. Using the Copier Function
This chapter describes the copier function.
The Screen in Copier Mode
This section provides information about the screen when the machine is in copi-
er mode.
er mode.
Important
❒ With the Type 1 model, the functions that require an ADF cannot be used.
By default, the display shows the copier screen when the machine is turned on.
If the scanner or fax screen is shown on the display, press the {Copy} key on the
control panel to switch to the copier screen.
By default, the display shows the copier screen when the machine is turned on.
If the scanner or fax screen is shown on the display, press the {Copy} key on the
control panel to switch to the copier screen.
❖ Screen in standby mode
• First line:
Shows the current status of the machine and current paper size.
• Second line:
Shows the current reduction or enlargement ratio, copy quality, and num-
ber of copies.
ber of copies.
Note
❒ The start-up mode can be specified in the [Default Mode] setting under [Admin
Settings]
.
Reference
For details about [Default Mode], see p.191 “Administrator Settings”.
For details about [Default Mode], see p.191 “Administrator Settings”.
Ready A4
100% Mixed 01