Ricoh spc220s Guía Del Usuario

Guide to the Machine

4

When describing procedures that are model-specific, this manual refers to the
different machine models as Type 1, Type 2, or Type 3. The following table de-
scribes the model types.

❖ Model types

Furthermore, the 

 symbol is used for information that is relevant

only to the 120 V model machine, and the 

 symbol is used for in-

formation that is relevant only to the 220 to 240 V model machine.

❖ Checking the model of your machine

To identify the model of your machine, do the following:
• Check the top of your machine to see if the ADF is installed or not.
• Check the label of the printer driver CD-ROM for the supported printer

driver.

• Check the label on the rear of your machine for the voltage rating.
In the illustration below, the machine on the left is the Type 1 model and the
machine on the right is the Type 2/ Type 3 model.

❒ This manual uses the illustrations of the Type 2 or Type 3 model, unless ex-

plicitly specified.

Type 1

Not installed

DDST driver

Type 2

Installed

DDST driver

Type 3

Installed

PCL and PS3 drivers

BAA035S