Ricoh spc220s Guía Del Usuario

Specifying Scan Settings

113

This section describes how to specify image density and quality for the current job.

This section describes how to adjust image density for the current job.
There are five image density levels. The higher the density level, the darker the
printout.

A

Press the {Density} key.

B

Press the {Density} key or {U}{T} keys to select the desired density level,
and then press the {OK} key.

❒ Press the { } key or {Clear/Stop} key to discard the current change and re-

turn to the initial screen.

❒ You can change the [Density] setting under [Copy Settings] to always make

copies with a specific density level.

❒ Temporary job settings are cleared in the following cases:

• When no input is received for the period of time specified in [Auto Clear]

while the initial screen is displayed.

• When the {Clear/Stop} key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.

Reference
For details about [Density], see p.166 “Copy Settings”.
For details about [Auto Clear], see p.191 “Administrator Settings”.

BAA133S