Ricoh spc220s Guía Del Usuario

Copy Settings

167

This section describes the copy setting parameters.

❒ Some items might not appear, depending on the model type you are using.

❖ Paper Select

Specifies the tray for printing copies.
When a tray is selected, the machine prints from that tray only.
When a paper size is selected, the machine prints from the trays that contain
the paper of the specified size, except the bypass tray. If tray 1 and tray 2 both
contain the paper of the specified size, the machine starts to print from tray 1.
If tray 1 runs out of paper, the machine automatically switches to tray 2 to
continue printing. If tray 2 runs out of paper, load paper in tray 1.
If tray 2 is not installed, only [Tray1] and [Bypass Tray] appear.
Default: [Tray1]
• Tray1
• Tray2
• Bypass  Tray
• A4
• LTR

❖ Sort

Configures the machine to sort the output pages into sets when making mul-
tiple copies of a multi-page document (P1, P2, P1, P2...).
Default: [Off]
• On
• Off 

❖ Quality

Specifies the content of originals, to optimize copy quality.
Default: [Mixed]
• Text

Select this when the original contains only text and no photographs or pic-
tures.

• Photo

Select this when the original contains photographs or pictures. Use this
mode for the following types of original:
• Photographs
• Pages that are entirely or mainly photographs or pictures, such as mag-

azine pages.

• Mixed

Select this when the original contains both text and photographs or pic-
tures.