Ricoh spc220s Guía Del Usuario
Error and Status Messages on the Screen
239
9
Error and Status Messages on the Screen
This section describes the meaning of messages that appear on the screen and
what to do when a particular message appears.
Messages are listed in alphabetical order in the table below.
“X” indicates the parts of the messages that appear differently depending on a
specific situation, such as the paper sizes or types, tray names, or toner colors.
what to do when a particular message appears.
Messages are listed in alphabetical order in the table below.
“X” indicates the parts of the messages that appear differently depending on a
specific situation, such as the paper sizes or types, tray names, or toner colors.
Message
Causes
Solutions
ADF JAM Open ADF Cover
and Clear Jam
and Clear Jam
An original has been jammed
inside the ADF.
inside the ADF.
• Remove jammed originals,
and then place them again.
See p.228 “Removing
Scanning Jams”.
See p.228 “Removing
Scanning Jams”.
• Check the originals are
suitable for scanning. See
p.87 “Placing Originals”.
p.87 “Placing Originals”.
ADF Kit Life Replace ADF Kit The ADF kit needs to be re-
placed.
Replace the ADF kit. Contact
your sales or service represen-
tative.
your sales or service represen-
tative.
Application Disable Press
Clear Key
Clear Key
The requested scan feature
has been disabled by the user.
has been disabled by the user.
Enable the Scan to E-mail,
Scan to FTP or Scan to Folder
feature.
Scan to FTP or Scan to Folder
feature.
Access the machine using a
Web browser, click [Network
Application]
Web browser, click [Network
Application]
, and then select the
relevant checkbox.
Bypass Tray not supported by
duplex
duplex
You selected duplex printing
using paper fed from the by-
pass tray, but the bypass tray
does not support duplex
printing.
using paper fed from the by-
pass tray, but the bypass tray
does not support duplex
printing.
Select a different tray.
Bypass Tray Paper Empty
The bypass tray has run out of
paper.
paper.
Load paper to the bypass tray.
See p.80 “Loading Paper in
the Bypass Tray”.
See p.80 “Loading Paper in
the Bypass Tray”.
Bypass Tray Paper Size Mis-
match?Y/N
match?Y/N
The paper size set for the doc-
ument differs from the size of
the paper in the tray.
ument differs from the size of
the paper in the tray.
Press the {B&W Start} key or
{Color Start} key to begin
printing, or press the
{Clear/Stop} key to cancel the
job.
{Color Start} key to begin
printing, or press the
{Clear/Stop} key to cancel the
job.
Bypass Tray Paper Type Mis-
match?Y/N
match?Y/N
The paper type set for the doc-
ument differs from the type of
the paper in the tray.
ument differs from the type of
the paper in the tray.
Press the {B&W Start} key or
{Color Start} key to begin
printing, or press the
{Clear/Stop} key to cancel the
job.
{Color Start} key to begin
printing, or press the
{Clear/Stop} key to cancel the
job.
Calibrating...
The machine is calibrating the
color.
color.
Wait a while.