Haier 29t7a Manual De Usuario
Figure A
Figure B
Antenna cable
with a plug
with a plug
Figure C
Figure D
Antenna feeder
Antenna adapter
75-300
Ω
Coaxial cable(75
Ω
) twin-lead cable(300
Ω
)
Antenna Connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75
),insert the
antenna plug (see figure C) into 75
socket
(see figure A).
2.If you use a twin-lead cable(300
2.If you use a twin-lead cable(300
),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75
leads to antenna adapter and then insert the
antenna adapter into the 75
socke (see
figure B).
Power source wire connection
Insert the power plug into AC outlet.
To install and to replace batteries of the remote
control unit
1.Place the remote control unit with the face
down, then open the battery cover of the unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking into
the battery compartment.
(3)Always replace both batteries at the same
time.
(4)Do not use rechargeable batteries (Ni-cd)
or mix battery types.
(5)Never place batteries in a fire. Dispose
of the batteries with your domestic
rubbish collection.
Insert the power plug into AC outlet.
To install and to replace batteries of the remote
control unit
1.Place the remote control unit with the face
down, then open the battery cover of the unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking into
the battery compartment.
(3)Always replace both batteries at the same
time.
(4)Do not use rechargeable batteries (Ni-cd)
or mix battery types.
(5)Never place batteries in a fire. Dispose
of the batteries with your domestic
rubbish collection.
Ω
Ω
Ω
Ω
FUNCTION BUTTONS AND EXTERNAL SOCKETS
(8)S-video input
(9)Video input/output
(10)DVD component input
(11)Antenna input
(12)Audio input/output
(9)Video input/output
(10)DVD component input
(11)Antenna input
(12)Audio input/output
(1)Remote sensor: let the remote controller
aim here the set can receive remote
control signal.
aim here the set can receive remote
control signal.
(2)Power switch: press the button to turn
on the TV set . Press the button again
to turn off the TV set.
(3)Power indicator: the indicator lights in
standby status ,the indicator lights in
standby status ,the indicator lights in
sleep status . The indicator glints when
you use remote controller.
(4)Menu button
(5)Program up/down button
(6)Volume up/down button
(5)Program up/down button
(6)Volume up/down button
(7)TV/AV
2.Rear Panel and Side Panel
1.Front Panel
(8)
(9)
(10)
(11)
(12)
Y
Cb
OUT
S-VIDEO
Cr
IN
VIDEO
L AUDIO R
3
4
FUNCTION BUTTONS AND EXTERNAL SOCKETS
Antenna
AUDIO
VIDEO
AUDIO-R
AUDIO-L
VIDEO
L
R
MENU
TV/AV
VOL-
VOL+
CH-
CH+
(4)
(7)
(6)
(7)
(6)
(5)
(3)
(2)
(1)
Y
Cb
OUT
S-VIDEO
Cr
IN
VIDEO
L AUDIO R
Y
Cb
OUT
S-VIDEO
Cr
IN
VIDEO
L AUDIO R