Nortel 2526T Guía Del Usuario
162
Configuring Security using the CLI
Creating a Management Target Address
To create an entry in the Management Target Address table, use the
following procedure:
following procedure:
Step
Action
1
From the Device Manager menu bar, choose Edit > SnmpV3 >
Target Table.
Target Table.
The Target Table dialog box appears, with the Target Address Table
tab appears.
tab appears.
The following figure displays the Target Table dialog box, target
Address Table tab.
Address Table tab.
Figure 49
Target Table dialog box, Target Address Table tab
Target Table dialog box, Target Address Table tab
Target Address Table fields
The following table describes the Target Address Table fields.
Table 76
Target Address Table fields
Target Address Table fields
Field
Description
Name
Specifies the name for this target table entry.
TDomain
Specifies the domain of the management target. The
default is snmpUDPDomain.
default is snmpUDPDomain.
TAddress
Specifies the IP address and destination UDP port for
this management target, for example, 10.0.4.27:162.
this management target, for example, 10.0.4.27:162.
Timeout
Specifies the length of the time to wait in 1/100
th
of a second, for an acknowledgement from this
management target before declaring the message as
timed-out. The default is 1500 milliseconds.
management target before declaring the message as
timed-out. The default is 1500 milliseconds.
RetryCount
Specifies the number of times this device can
resend messages to this management target if initial
messages are not acknowledged. The default is 3.
resend messages to this management target if initial
messages are not acknowledged. The default is 3.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.