Nortel 2526T Guía Del Usuario
164
Configuring Security using the CLI
8
In the Params field, enter the name of an entry in the Target Param
table.
table.
9
Click Insert.
The new Target address is shown in the list.
—End—
Creating Target Parameters
To create a target parameter, use the following procedure:
Step
Action
1
From the Device Manager menu bar, choose Edit > SnmpV3 >
Target Table.
Target Table.
The Target Table dialog box appears, with the Target Address Table
displayed.
displayed.
.
2
Select the Target Params Table tab.
The Target Params Table tab appears.
The following figure displays the Target Params table tab.
Figure 51
Target Params Table tab
Target Params Table tab
3
Click Insert.
The Target Table, Insert Target Params Table dialog box appears.
The following figure displays the Target Table, Insert Target Params
Table dialog box.
Table dialog box.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.