Nortel 1010 Guía Del Usuario
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
100 Chapter 5 Configuring the system
NN46110-500
Configuring multinetting using the CLI
shows the command syntax for configuring multinetting using the CLI.
Adding an IP address
To add an IP address:
1
Navigate to config mode by entering the following command: config.
2
Select the interface for the multinet by entering the following command:
interface gigabitEthernet <slot/port>
interface gigabitEthernet <slot/port>
.
3
Add a secondary address to the interface: ip address <ip-address>
<mask> secondary
<mask> secondary
.
Deleting an IP address
To delete an IP address:
1
Navigate to config mode by entering the following command: config.
2
Select the interface in which the multinetted address needs to be deleted by
entering the following command: interface gigabitEthernet
<slot/port>
entering the following command: interface gigabitEthernet
<slot/port>
.
3
Delete a secondary address from the interface:
no ip address
<ip-address> <mask>
Table 8 Adding/Deleting a secondary address
Command Description
Command Syntax
Add a secondary address to
an interface
an interface
CES (config-if) # ip address <ip-address>
<mask> secondary
<mask> secondary
Delete a secondary address CES (config-if) # no ip address
<ip-address> <mask> secondary