Nortel 1010 Guía Del Usuario

Descargar
Página de 178
Chapter 3 Setting up the Nortel VPN Router 1010, 1050, and 1100 63
Nortel VPN Router Configuration — Basic Features 
 
Set the Text Pre-Shared Key to the same name as central office tunnel 
password.
Set Dynamic Routing to enabled.
Set RIP to enabled.
After the central office setup and the BOQS are complete, the Nortel VPN 
Router1010, 1050, or 1100 is directly accessible from the central office. This 
means that there is just one hop between the central office and the branch office. 
RIP propagates routes to this subnet across the tunnel created by BOQS. 
You must have at least two more IP addresses than IP workstations on the Nortel 
VPN Router 1010, 1050, or 1100 private network. The first address from the 
subnet is assigned to the private interface of the branch office switch and the 
second address becomes the management IP address of the switch. Each branch 
office must be in its own subnet. 
 shows how offices with approximately 50 workstations can each have 
subnets assigned.
Service provider environment
Service providers generally have an isolated NOC from which all devices are 
managed. The addressing scheme could be different from a central office and 
require a separate designated tunnel to configure the Nortel VPN Router 1010/
1050/1100 series of switches.
Table 5   Subnet assignments
Private 
Network IP 
address
Private Network 
IP Mask
Nortel VPN 
Router1010/1050/
1100 Private 
Interface Address
Nortel VPN 
Router1010/1050/
1100 Management 
Interface Address
BO Workstations 
Addresses (assigned 
by DHCP Server)
200.1.1.0
255.255.255.192
200.1.1.1
200.1.1.2
From 200.1.1.3 to 
200.1.1.62
200.1.1.64
255.255.255.192
200.1.1.65
200.1.1.66
From 200.1.1.67 to 
200.1.1.126
200.1.1.128
255.255.255.192
200.1.1.129
200.1.1.130
From 200.1.1.131 to 
200.1.1.190