Nortel 1100 Instruccion De Instalación
Chapter 6 Nortel VPN Router 2700 and 2600 option installation 99
Nortel VPN Router Installation — Hardware Options
Removing the front bezel and top cover
To install option cards or DIMMs, you must remove the front bezel and the top
cover from the gateway.
cover from the gateway.
To remove the front bezel:
1
Shut down the VPN Router 2700 or 2600 using the Web GUI or the CLI, and
then unplug it as described in
then unplug it as described in
2
Use a Phillips screwdriver to turn each of the two screws on the front bezel a
quarter turn counterclockwise
quarter turn counterclockwise
Figure 32
Removing the front bezel
3
Grip the two handles and firmly pull the bezel toward you to unsnap it from
the chassis.
the chassis.
Warning:
Risk of electric shock
Turn off the gateway and unplug the power cord before you attempt to
remove or install an option card or DIMM.
remove or install an option card or DIMM.
Caution:
Risk of equipment damage
Do not use the piece with the Nortel logo and the LEDs as a handle.
CS260015B