Extreme wm100 Guía Del Usuario
WM-AD configuration
HWC_GSG_VNSConfiguration.fm
Configuring filtering rules
120385-00 Rev 01, March 2007
112
Summit WM, Getting Started Guide
8.5.2.2 Configuring MAC-based authentication
MAC-based authentication can be used in both SSID network assignment and
AAA network type assignment. For more information, see
AAA network type assignment. For more information, see
Now you must configure the WM-AD for filters. The following section describes
how to configure the WM-AD filters.
how to configure the WM-AD filters.
8.6 Configuring filtering rules
On a per WM-AD basis, the Summit WM Switch can be configured to apply a
specific filtering policy on the user traffic that is routed through it. The filtering
policies are applied after the authentication is returned.
specific filtering policy on the user traffic that is routed through it. The filtering
policies are applied after the authentication is returned.
The filter definition can be static on the Summit WM Switch itself, or the filter
definition can be set to dynamically provisioned if RADIUS authentication is used.
The standard RADIUS attribute can be used to identify a specific filter definition
to apply to incoming/outgoing user traffic upon successful authentication of the
user during authentication.
definition can be set to dynamically provisioned if RADIUS authentication is used.
The standard RADIUS attribute can be used to identify a specific filter definition
to apply to incoming/outgoing user traffic upon successful authentication of the
user during authentication.
For more information, see Summit WM-Series WLAN Switch Software WM2000
User Guide.
User Guide.
8.6.1 Configuring filtering rules for filters in SSID
network assignment
network assignment
The SSID network assignment type offers the following three default filters:
•
Exception
•
Non-authenticated
•
Default
8.6.1.1 Configuring filtering rules for Exception filter
To configure rules for the Exception filter:
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the left pane, click the SSID WM-AD for which you want to define the
filtering rules. The Topology tab is displayed.
3. Click the Filtering tab.