Extreme wm100 Guía Del Usuario

HWC_GSG_VNSConfiguration.fm

 120385-00 Rev 01, March 2007

Summit WM, Getting Started Guide

   

   

  

1. From the main menu, click WM Access Domain Configuration. The WM 

Access Domain Configuration screen is displayed.

2. In the left pane, select the SSID WM-AD for which you want to configure the 

Non-authenticated filtering rules. The Topology tab is displayed.

3. Click the Filtering tab. 

4. From the Filter ID drop-down list, click Non-authenticated. 

5. Define a filtering rule.

a) In the IP/subnet:port text box, type the destination IP address.

You can also specify the IP range, a port designation or a port range on 
the IP address in the IP/subnet:port text box.

b) From the Protocol drop-down list, click the applicable protocol. 

The default is N/A.

6. For Captive Portal assignment, define a rule to allow access to the default 

gateway for this WM-AD

a) Select the IP:Port of the filtering rule that you defined in Step 5.

b) In the IP/subnet:port, type the default gateway IP address (WM-AD’s IP 

address) that you defined in the Topology screen for this WM-AD.

7. Click Add. The rule is displayed in the middle of the screen.

8. If applicable, define more rules by repeating Steps 5 and 6.

9. To allow the traffic between the wireless device and the network, Select In 

and Out.

10. Select the Allow feature for every rule you created.

11. To save your changes, click Save. 

The Default filter is applied by default (automatically) after the authentication of 
the wireless device under the following circumstances:

No match is found in the Exception filter rules

No filter attribute value is returned by the authentication server for the device

No match is found in the filter ID values

In order to ensure that a packet is not dropped entirely under the above 
circumstances, the final rule in the Default filter must be Allow All.

To configure rules for the Default filter: