Extreme wm100 Guía Del Usuario
Routing configuration
HWC_GSG_RouterConfiguration.fm
Configuring static routing
120385-00 Rev 01, March 2007
54
Summit WM, Getting Started Guide
To define a default static route for any unknown address not in the routing
table, type 0.0.0.0. This is also called as defining the default gateway.
table, type 0.0.0.0. This is also called as defining the default gateway.
4. Type the appropriate subnet mask in the Subnet Mask text box to separate
the network portion from the host portion of the IP address (typically
255.255.255.0).
255.255.255.0).
To define a default static route for any unknown address, type 0.0.0.0.
5. Type the IP address of the specific router port or gateway that serves as the
next-hop for the packets from Summit WM Switch (default gateway).
This router port (or gateway) must be on the same subnet as the Summit WM
Switch.
Switch.
6. Click Add. The new route is added to the list of routes.
7. Select the Override dynamic routes check box to give priority over the
OSPF routes that the Summit WM Switch uses for routing.
By default, the Override dynamic routes is enabled. If you want to remove
priority for static routes so that the routing is always controlled dynamically,
clear the Override dynamic routes check box.
priority for static routes so that the routing is always controlled dynamically,
clear the Override dynamic routes check box.
8. To save your changes, click Save.
5.1.1 Viewing the forwarding table
You can view the defined routes, whether static or OSPF, and their current status
in the forwarding table.
in the forwarding table.
To view the forwarding table:
1. From the main menu, click Reports & Displays. The Reports & Displays
screen is displayed.