Extreme wm100 Guía Del Usuario

HWC_GSG_RouterConfiguration.fm

120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide

    

   

  

2. Click Forwarding Table. The Forwarding Table is displayed.

3. To update the display, click Refresh.

To configure the OSPF routing, you must:

Define one data port as a router port on the IP addresses screen.

Enable OSPF globally on the Summit WM Switch. For more information, see 

Define the global OSPF parameters. For more information, see 

Ensure that the OSPF parameters defined for the Summit WM Switch are 
consistent with the adjacent routers in the OSPF area. The consistency 
includes the following:

Timer Settings – If the peer router has different timer settings, the protocol 
timer settings in the Summit WM Switch must be changed to the peer 
router to match in order to achieve OSPF adjacency.

MTU – The MTU of the ports on either sides of the OSPF link must match. 
You must remember here that the MTU for ports is set to 1500 on the 
Summit WM Switch is when configuring the physical data ports on IP 
addresses’ screen. The value of 1500 matches the MTU in standard 
routers.