Citel 1100 Guía De Instalación
EXTender 1100A Remote Module: Quick Installation Guide
19
4. Setting
the
Dial Numbers – Dial Numbers are used to connect the Switch
Module from the Remote Module:
a) Office Number – This is the phone number of the telephone line
connected to the Switch Module. Is always required for Dial up
connections.
connections.
b) Remote Number – This is the phone number of the telephone line
connected to the Remote Module. This number will be transmitted to the
Switch Module for use with the Dialback feature (and is also used to
identify the Remote Module connected to the Switch module). The
remote Number is only required for Dialback operation. Refer to the
Advanced Configuration for more details.
Switch Module for use with the Dialback feature (and is also used to
identify the Remote Module connected to the Switch module). The
remote Number is only required for Dialback operation. Refer to the
Advanced Configuration for more details.
Recommended Connect Parameters – User ID
There is one more Recommend connect parameter to configure. The User ID is
required for all 1100A connections. The default Remote User ID is not
configured so on each connection the user would be prompted to enter the
desired User ID. If the User ID is configured then the remote User will not be
prompted each connection. The User ID can be configured using the Setup
Wizard or the MC.
required for all 1100A connections. The default Remote User ID is not
configured so on each connection the user would be prompted to enter the
desired User ID. If the User ID is configured then the remote User will not be
prompted each connection. The User ID can be configured using the Setup
Wizard or the MC.
Path: Remote->Utilities->Setup_Wizard
Path: Remote->Configuration->Port
You can also configure some Connect Parameter settings using the TMI
TMI Path: (Remote Only)->Set Config->Connect Menu-> User ID
5. Setting
the
User ID. A User ID “maps” a specific port on the Remote Module
to a specific port on the Switch Module. When connecting to the 1100A
Switch you require a User ID. The default ID is 1 (representing the port
number). This feature is also typically used when connecting to one of Citel’s
multi-user devices such as a PBXgateway. If this remote is connecting to a
multi-user device refer to the System Administrator’s Guide of the
PBXgateway for more information.
Switch you require a User ID. The default ID is 1 (representing the port
number). This feature is also typically used when connecting to one of Citel’s
multi-user devices such as a PBXgateway. If this remote is connecting to a
multi-user device refer to the System Administrator’s Guide of the
PBXgateway for more information.
T
HE
E
SSENTIAL
C
ONFIGURATION
P
ARAMETERS FOR THE
R
EMOTE
M
ODULE ARE
N
OW
C
OMPLETE
.
F
OR
A
DVANCED
C
ONFIGURATION
P
ARAMETERS
R
EFER TO THE
L
IST ON
Advanced Configuration – Quick Reference
OR THE
.
P
LEASE
T
EST THE
C
URRENT
C
ONFIGURATION BY
M
AKING A
F
EW
“T
EST
”
P
HONE
C
ALLS
P
RIOR TO
G
OING ON TO THE
A
DVANCED
C
ONFIGURATION
S
ECTION
.
© Copyright 2008 Citel plc All Rights Reserved