Citel 1100 Guia Da Instalação

 

4. Setting 

the 

Dial Numbers – Dial Numbers are used to connect the Switch 

Module from the Remote Module: 

a)  Office Number – This is the phone number of the telephone line 

connected to the Switch Module.  Is always required for Dial up 
connections. 

b)  Remote Number – This is the phone number of the telephone line 

connected to the Remote Module. This number will be transmitted to the 
Switch Module for use with the Dialback feature (and is also used to 
identify the Remote Module connected to the Switch module).   The 
remote Number is only required for Dialback operation.  Refer to the 
Advanced Configuration for more details. 

 

There is one more Recommend connect parameter to configure.  The User ID is 
required for all 1100A connections.  The default Remote User ID is not 
configured so on each connection the user would be prompted to enter the 
desired User ID.  If the User ID is configured then the remote User will not be 
prompted each connection.  The User ID can be configured using the Setup 
Wizard or the MC. 

Path: Remote->Utilities->Setup_Wizard 

Path: Remote->Configuration->Port 

You can also configure some Connect Parameter settings using the TMI 

TMI Path:  (Remote Only)->Set Config->Connect Menu-> User ID 

 

5. Setting 

the 

User ID.  A User ID “maps” a specific port on the Remote Module 

to a specific port on the Switch Module. When connecting to the 1100A 
Switch you require a User ID.  The default ID is 1 (representing the port 
number).  This feature is also typically used when connecting to one of Citel’s 
multi-user devices such as a PBXgateway. If this remote is connecting to a 
multi-user device refer to the System Administrator’s Guide of the 
PBXgateway for more information. 

 

ETAILS

 

© Copyright 2008 Citel plc All Rights Reserved