Jiffy j-1 Guía Del Usuario

The cleaning procedure below is recommended as a regular maintenance
measure to help your steamer maintain its maximum steaming performance.
This maintenance should be performed on a basis of every 3-6 months
depending on your water supply. In most cases, a steamer that is severely
clogged will require disassembly to properly clean and prolong the life span of
the unit. An authorized repair center or a Jiffy® Steamer service technician best 
performs this disassembly. 

1.  Unplug your steamer from the wall outlet. Remove hose attachment at the

brass coupling using a wrench and remove water bottle from unit. Pour out
any remaining water from your unit. 

2.  If the hose attachment is blocked by sediment build-up, flush your hose

attachment by using a garden water hose. This should loosen and remove
any build-up that may have occurred within the hose itself. 

3.  To clean the internal parts of your steamer, use of the Jiffy® Liquid Cleaner

(10 ounce bottle) is recommended. This acid-based cleaner will remove
hard water deposits and sediment build-up. This
cleaner is not available for export. 

4.  Pour the cleaning solution into the water cup of

your steamer. This is the location on the steamer
base where you normally place the water
bottle or caddy. Allow the cleaning solution
to remain in the unit for 3 hours. DO
NOT STEAM THE SOLUTION IN
THE UNIT AS DAMAGE MAY
OCCUR. 

5.  Pour the cleaning solution out of the

steamer. Do this by tilting the steamer
back and forth and pouring the solution
out of the water cup area. 

6.  Rinse the unit thoroughly by flushing

with fresh water 3 times. 

7.  If discolored water or residue continues

to come from the unit, the above
procedure may need to be repeated. 

8.  Please call 1-800-525-4339 or 731-885-

6690 for further instructions or questions.