Panasonic DBS 576 Manual Suplementario

Descargar
Página de 370
5-58
DBS 576HD (USA) issued September 2001
576-50-700
Chapter 7. SLT Features
Section 700 - Operation
Operation
To assign a DSS/BLF key
:
To make an intercom call using the DSS/BLF key:
To pick up a call on a DSS/BLF key:
Hardware Requirements
N/A
Related Programming
FF1-0-02: BLF Call Pickup
FF4-0-04: FF Key Assignment
Considerations
If several calls arrive at a DSS/BLF key, the calls are queued and ring on a first-in, first-out basis.
If a BLF key has a second call while busy and off- hook signaling is enabled, the BLF key starts 
blinking. The call can be answered by pressing the BLF key or going on hook and then off hook.
Direct Line Appearances
Direct Line (DL) keys are used to originate and receive calls over specific trunk numbers (DL keys 
can be assigned to any trunk number).
The LED for a DL key will flash red on an incoming call even if the CO line is set to ring. If another 
extension answers the call, the LED on the telephone will light solid red.
Action
Result
1.   Press the PROG key.
2.   Press the FF key to be assigned the DSS/BLF appearance.
3.   Press the Redial key.
4.   Enter the code for the desired DSS/BLF mode as follows:
9+ Ext # ---- DSS Mode Only
81+ Ext # --- DSS/BLF Immediate Ring
82 + Ext # -- DSS/BLF Delayed Ring
83 + Ext # -- DSS/BLF No Ring
5.   Press the HOLD key.
Action
Result
1.   Press the flashing DSS/BLF key.
Action
Result
1.   Go off-hook or press the flashing DSS/BLF key.