Panasonic DBS 576 Manual Suplementario
Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
5-59
Operation
Hardware Requirements
•
N/A
Related Programming
•
FF4: Key Assignment
Considerations
•
N/A
Multi-CO (MCO) Appearances
Description
You can make and receive CO line calls using a Multi-CO (MCO) key. Each extension can have up to
5 MCO keys.
An MCO key can be assigned to any of the pooled trunk groups. Pressing the MCO key is the same as
dialing the MCO Access Code (usually 9, 81-84).
Operation
Operation
Action
To originate a trunk call...
1. Press an idle DL key.
2. The key blinks green as the call is made.
2. The key blinks green as the call is made.
To place a call on Exclusive Trunk Hold (page 133)...
1. Press the DL key.
To place a call on System Trunk Hold (page 133)...
1. Press the HOLD key.
To transfer a call...
1. Press the HOLD key.
2. Dial the destination extension.
3. Press the PROG key.
2. Dial the destination extension.
3. Press the PROG key.
Operation
Action
To originate a trunk call
1. Press an idle MCO key.
The key blinks (green) as the call is made.
The key blinks (green) as the call is made.
To receive a call on an MCO key.
1. If ringing line preference is enabled, go off-
hook.
If ringing line preference is not enabled, go
off-hook and press the MCO key with the
green flashing LED.
If ringing line preference is not enabled, go
off-hook and press the MCO key with the
green flashing LED.
The LED lights solid green.
To place a call on Exclusive Trunk Hold
1. Press the MCO key.
The key flashes green while the call is held.
The key flashes green while the call is held.