Panasonic DBS 576 Manual Suplementario
Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
5-69
To assign a feature code or extension number to a one-touch key:
To check a programmed one-touch key:
Hardware Requirements
•
N/A
Related Programming
•
FF8-1: PSD Numbers
•
FF8-1: PSD Names
Considerations
•
One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.
Onhook Dialing
Description
Onhook Dialing is a standard feature for key telephones where you can dial onhook using the dialpad,
one-touch keys, or FF keys.
Operation
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. If the System is set for MCO Code level, press the following
keys AUTO * #. Otherwise, proceed to step 5.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Press the CONF key.
C displays
3. Press the one-touch key to be checked.
Programmed data displays
4. Replace the handset or press the ON/OFF key.